載入中...請稍候...

訂閱電子報


Total Phase Promira Serial Platform 新一代加強版主機適配器

  • Total Phase PROMIRA
  • Total Phase PROMIRA
Bookmark and Share


產品介紹

Promira™ Serial Platform Total Phase最先进的串行设备。这个新的和强大的平台提供了许多优于Total Phase上一代Aardvark主机适配器 

  • 集成电压转换功能确保您可以在0.95.0伏的各种电压下工作,无需任何昂贵的附件板 
  • 高速USB连接到电脑系统实现台式编程,测试和仿真,提供了高性能和方便性 
  • 以太网连接更方便台式工作,并且还可以实现远程控制,满足您的自动化需求。(通过输入IP,即使仪器不在身边也可以控制使用。
  • 能够提供200 mA的电源,Promira平台可以轻松为您的项目供电,简化连接和故障排除
  • 新架构使您能够将应用程序下载到Promira平台 - 当您需要新功能时升级设

promiraappchart.jpg

选用功能升级Promira

I2C Active - Level 1 Application 

  • Master at speeds up to 1 MHz
  • Slave at speeds up to 1 MHz
  • Single slave response of up to 256 bytes
  • Program EEPROM or other I2C memory
  • Use up to 6 GPIOs (4 while using I2C)
  • Provide up to 200 mA of power to your embedded project
  • Operates with voltages from 0.9 V - 3.3 V, 5 V fault tolerant

I2C Active - Level 2 Application 

  • Master at speeds up to 3.4 MHz
  • Slave at speeds up to 3.4 MHz
  • Each slave response can be up to 256 bytes
  • No inter-byte delays 
  • Program EEPROM or other I2C memory
  • Use up to 12 GPIOs (10 while using I2C)
  • Provide up to 200 mA of power to your embedded project
  • Operates with voltages from 0.9 V - 3.45 V, 5 V fault tolerant

SPI Active - Level 1 Application 

  • Master at speeds up to 12.5 MHz
  • Slave at speeds up to 8 MHz
  • Single slave response of up to 256 bytes
  • Program EEPROM, Flash, or other SPI memory
  • Use up to 6 GPIOs (2 while using SPI)
  • Up to 1 Slave Select (configurable, shared with GPIO)
  • Software configurable Slave Select (SS) polarity in master mode
  • Provide up to 200 mA of power to your embedded project
  • Operates with voltages from 0.9 V - 3.3 V, 5 V fault tolerant

SPI Active - Level 2 Application 

  • Master at speeds up to 40 MHz
  • Slave at speeds up to 20 MHz
  • Single slave response of up to 256 bytes
  • Program EEPROM, Flash, or other SPI memory - including Dual I/O programming 
  • Use up to 12 GPIOs 
  • Up to 3 Slave Selects (configurable, shared with GPIO)
  • Software configurable Slave Select (SS) polarity in master mode
  • Provide up to 200 mA of power to your embedded project - with 2 independent target Power supplies
  • Operates with voltages from 0.9 V - 3.3 V, 5 V fault tolerant

SPI Active - Level 3 Application

  • Full support for Single, Dual and Quad I/O SPI
  • Master at speeds up to 80 MHz
  • Slave at speeds up to 20 MHz
  • Each slave response size of up to 256 bytes
  • Program EEPROM, Flash, or other SPI memory - including Single, Dual and Quad I/O programming 
  • Use up to 16 GPIOs 
  • Up to 8 Slave Selects (configurable, shared with GPIO)
  • Software configurable Slave Select (SS) polarity in master mode
  • Provide up to 200 mA of power to your embedded project - with 2 independent target Power supplies
  • Operates with voltages from 0.9 V - 3.45 V, 5 V fault tolerant

 

eSPI 分析应 

英特尔在20136月首次发布的增强型串行外设接口(eSPI)被设计为低引脚数(LPC)总线的替代品。 eSPI支持嵌入式控制器(EC),基板管理控制器(BMC),超级I / OSIO)和端口80调试卡之间的通信。
在本规范之前,嵌入式控制器(EC),基板管理控制器(BMC)和超级I / OSIO)通过低引脚数(LPC)总线连接到芯片组

Total Phase eSPI分析应用是行业中第一个eSPI监控器。 使用此应用程序,您将能够监视多个eSPI设备之间的eSPI通信

  • Monitor communication between a master and slaves on data lines
  • Support for single, dual and quad I/O
  • Support for clock speeds up to 66MHz
  • Monitor up to 5 channels (peripheral, virtual wire, OOB, Flash, Independent)
  • Monitor up to 2 slave select lines
  • Monitor 2 alert lines
  • Monitor 2 reset lines
  • Match triggers, hardware filters and statistics 

 

当与Total Phase Data Center 软件结合使用时,您将能够通过Promira串行平台实时捕获和显示eSPI总线数据。 Total Phase为业界提供唯一的协议分析软件,为WindowsLinuxMac OS X提供真正的实时性能和跨平台支持。
虽然eSPI利用为SPI设计的物理接口,包括主多从master-multi slave和数据对应于时钟采样。

 

 

 

 
 
當與我們的數據中心™軟件結合使用時,您將能夠通過Promira串行平台實時捕獲和顯示eSPI總線數據。 Total Phase為業界提供唯一的協議分析軟件,為Windows,Linux和Mac OS X提供真正的實時性能和跨平台支持。
雖然eSPI利用為SPI設計的物理接口,包括主多從拓撲和關於時鐘的數據採樣規則,但相似性終止了!
輸入您的產品評論

產品評論

這項未有任何評論

最近瀏覽...