首頁
BZBGEAR
BZBGEAR EXH-100C6 信号延长器

BZBGEAR EXH-100C6 信号延长器

產品介紹

4K 18Gbps UHD HDMI HDBaseT 3.0 6/7 类电缆延长器，带 IR/eARC/ARC/POC/以太网/USB/RS-232，最长 330 英尺

概述

使用 BZBGEAR 的 BG-EXH-100C6 HDBaseT 3.0 扩展器体验无与伦比的音频和视频传输。这款最先进的设备可释放未压缩的高清/超高清音频和视频，以及 eARC/ARC、RS-232、双向红外、1Gb 以太网和 USB 2.0 信号，最远可达 328 英尺（100 米）的令人印象深刻的距离仅使用一根 CAT6A/7 电缆。告别凌乱的电线，迎接便利。

BG-EXH-100C6 具有 USB 2.0 主机/设备可配置性，可提供最大的灵活性和功能，使其成为 KVM 设置的完美解决方案。而且，借助双向电缆供电 (PoC)，无需第二个电源适配器，为您节省时间和金钱。

BG-EXH-100C6最高支持4K@60Hz 4:4:4分辨率，并拥有HDR10、HDR10+、杜比视界和HLG技术，确保无与伦比的画质。发射器还可以嵌入或解嵌音频，而接收器支持音频解嵌。此外，借助接收器 HDMI 输出的 eARC/ARC，您可以在本地音频系统上享受一流的音频质量，或者选择仅使用发射器的 HDMI 音频和 SPDIF 输出端口。

BZBGEAR 的 BG-EXH-100C6 是任何寻求顶级音频和视频扩展器的人的终极选择。凭借其先进的功能和无与伦比的性能，它一定会超出您的期望。

产品特点

HDMI Loop-out
环出以在发送端本地查看内容

Bi-Directional IR
通过接收器或发射器的红外线控制设备

Compliant
支持 HDMI 2.0b 和 HDCP 2.2 以确保内容保护

Rich Color Contrast

支持 HDR, HDR10, HDR10+, Dolby Vision, and HLG

Stunning Image Quality 令人惊叹的图像质量
4K 60Hz 4:4:4 清晰图像

Power Over Cable
只需为发射器或接收器供电，安装更方便

传输信号最远可达 328 英尺（100 米）
在发射器和接收器上使用两个 USB 2.0 端口
通过 S/PDIF 光学端口和发射器上的 3.5mm 立体声迷你音频嵌入和解嵌
从接收器到发送器的 HDMI ARC
发射器和接收器上的 LED 灯一目了然地验证连接状态
接收器和发射器上的 1Gbps LAN 端口可将额外设备连接到网络

规格

Technical
HDCP Compliance	HDMI 2.0b
HDCP Compliance	HDCP 2.2
Video Bandwidth	18Gbps
Video Resolution	Up to 4K@60Hz 4:4:4
HDBaseT Bandwidth	16Gbps on main and 2Gbps on return link
HDR	HDR, HDR10, HDR10+, Dolby Vision, HLG
Color Space	RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth	8/10/12-bit
Audio Formats	LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD, Master Audio, DSD
L/R Audio Formats	PCM 2.0
SPDIF Audio Formats	LPCM2.0, AC3 5.1, DTS 5.1
IR Level	12Vp-p
IR Bandwidth	20K - 60KHz
USB Bandwidth	Up to 350Mbps
Ethernet	1000Mbps
RS-232	Up to 921600bps
Transmission Distance	100m (via a single CAT 6A/7 cable)
ESD Protection	Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Transmitter	Input: 1 x HDMI IN [Type A, 19-pin female] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x HDBT OUT [RJ45, 8-pin female] 1 x SPDIF OUT [S/PDIF] 1 x L/R OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3pin-3.81mm Phoenix jack] 1 x SERVICE [Mini-USB, Update port] 1 x USB HOST [USB Type B] 2 x USB DEVICES [USB Type A] 1 x LAN [RJ45]
Receiver	Input: 1 x HDBT IN [RJ45, 8-pin female] / 1 x SPDIF IN [S/PDIF] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x L/R OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3pin-3.81mm Phoenix jack] 1 x SERVICE [Mini-USB, Update port] 1 x USB HOST [USB Type B] 2 x USB DEVICES [USB Type A] 1 x LAN [RJ45]
Mechanical
Housing	Metal Enclosure
Color	Black
Dimensions	Transmitter / Receiver: 170mm [W] x 102mm [D] x 22mm [H]
Weight	Transmitter: 425g, Receiver: 437g
Power Supply	Input: AC 100 - 240V 50/60Hz Output: DC 24V/1A (US/EU standard, CE/FCC/UL certified)
Power Consumption	15.36W (P0C)
Operating Temperature	32 - 104°F / 0 - 40°C
Storage Temperature	-4 - 140°F / -20 - 60°C
Relative Humidity	20 - 90% RH (no condensation)
Resolution/Cable Length	4K60 - Feet / Meters	4K30 - Feet / Meters	1080P60 - Feet / Meters
HDMI IN / OUT	16ft / 5M	32ft / 10M	50ft / 15M
Note: The use of “Premium High-Speed HDMI” cable is highly recommended.

接口

1. Power LED: Red LED indicates that the Transmitter is powered on.

2. LINK LED:

Light on: Transmitter and Receiver are in good connection status.

Light flashing: Transmitter and Receiver are in Low Power Mode.
Light off: Transmitter and Receiver are not connected.

3. VIDEO LED:

Light on: The video is encrypted.

Light flashing: The video is not encrypted.
Light off: No HDMI input.

4. ARC LED:

Light on: The device is switched to the ARC mode.

Light off: The device is switched to the SPDIF mode.

5. SPDIF LED:

Light on: The device is switched to the SPDIF mode.

Light off: The device is switched to the ARC mode.

6. SELECT button: Used for switching the ARC mode and SPDIF mode.

7. L/R IN/OUT switch:

Switch to left, the L/R IN/OUT port is the audio embedding port;

Switch to right, the L/R IN/OUT port is the audio de-embedding port.

8. LOOP OUT/ AUDIO ONLY switch:

Switch to left (LOOPOUT), the HDMI OUT port is the loopout port for the HDMI IN port;

Switch to right (AUDIO ONLY), the HDMI OUT port outputs 720P black screen image, and the audio is from ARC or SPDIF.

9. HOST/ DEVICE USB switch:

Switch to left (HOST), the USB HOST mode is enabled;

Switch to right (DEVICE), the USB DEVICE mode is enabled.

10. USB DEVICES: Two USB device ports, connected to U disk, mouse or keyboard.

11. USB HOST: USB extension host port, connected to PC.

12. SERVICE: Firmware update port.

13. DC 24V: DC 24V/1A power supply input port.

14. LAN: 1G Network port. When it switches to Gigabit Ethernet, the green indicator lights on; When it switches to 100M Ethernet, the yellow indicator lights on.

15. Data Signal Indicator (Yellow):

Illuminating: HDMI signal with HDCP.

Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.

16. HDBT OUT: 10G Network port, connected to the HDBT IN port of Receiver with a CAT 6A/7 cable. It is used for various signals pass-through.

17. Link Signal Indicator (Green):

Illuminating: Transmitter and Receiver are in good connection status.

Flashing: Transmitter and Receiver are in poor connection status.
Dark: Transmitter and Receiver are not connected.

18. HDMI IN: HDMI signal input port, connected to signal source device, supporting eARC/ARC amplifier.

19. HDMI OUT: HDMI signal loopout port. It can choose to be a LOOP OUT or AUDIO ONLY port through the LOOP OUT/AUDIO ONLY switch.

20. L/R IN/OUT: Audio embedding/de-embedding port. It can be used for audio embedding/de-embedding through the L/R IN/OUT switch.

21. SPDIF OUT: Optical output port.

22. IR IN: IR signal input port, connected to IR Receiver cable.

23. IR OUT: IR signal output port, connected to IR Blaster cable.

24. RS-232: RS-232 serial port, used for serial port command transmission.

25. Power LED: Red LED indicates that the Receiver is powered on.

26. LINK LED:

Light on: Transmitter and Receiver are in good connection status.

Light flashing: Transmitter and Receiver are in Low Power Mode.
Light off: Transmitter and Receiver are not connected.

27. VIDEO LED:

Light on: The video is encrypted.

Light flashing: The video is not encrypted.
Light off: No HDMI input.

28. ARC LED:

Light on: The device is switched to the ARC mode.

Light off: The device is switched to the SPDIF mode.

29. SPDIF LED:

Light on: The device is switched to the SPDIF mode.

Light off: The device is switched to the ARC mode.

30. SELECT button: Used for switching the ARC mode and SPDIF mode.

31. DEVICE/ HOST USB switch:

Switch to right (HOST), the USB HOST mode is enabled;

Switch to left (DEVICE), the USB DEVICE mode is enabled.

32. USB DEVICES: Two USB device ports, connected to U disk, mouse or keyboard.

33. USB HOST: USB extension host port, connected to PC.

34. SERVICE: Firmware update port.

35. DC 24V: DC 24V/1A power supply input port.

36. LAN: 1G Network port. When it switches to Gigabit Ethernet, the green indicator lights on; When it switches to 100M Ethernet, the yellow indicator lights on.

37. Data Signal Indicator (Yellow):

Solid: HDMI signal with HDCP.

Flashing: HDMI signal without HDCP.
Dark: No HDMI signal.

38. HDBT IN: 10G Network port, connected to the HDBT OUT port of Transmitter with a CAT 6A/7 cable. It is used for various signals pass-through.

39. Link Signal Indicator (Green):

Solid: Transmitter and Receiver are in good connection status.

Flashing: Transmitter and Receiver are in poor connection status.
Dark: Transmitter and Receiver are not connected.

40. HDMI OUT: HDMI signal output port, supporting eARC/ARC TV.

41. L/R OUT: Audio de-embedding output port.

42. SPDIF IN: Optical input port.

43. IR IN: IR signal input port, connected to IR Receiver cable.

44. IR OUT: IR signal output port, connected to IR Blaster cable.