elexol USBIO24 R Digital I/O Module 适配器

產品介紹

USBIO24 R Digital I/O Module

The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port. The modules I/O Port pin out and firmware are compatible with the previous versions of the USB I/O24 modules.

Description

The USBIO24 R is the ROHS Compliant version of our previous USB I/O 24 range. The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port. The modules I/O Port pinout and firmware are compatible with the previous versions of the USB I/O24 modules.

The USBIO24 R Digital I/O Module features 24 5V level signal lines individually programmable as input or output. As the module connects to the USB port, multiple modules can be connected to a single PC by using a USB hub or hubs. Each module features a serial number, and the PC can identify each module uniquely, allowing for multiple modules to be connected for a single application. The modules’ outputs can source or sink up to 30mA per I/O, up to a maximum of 50mA per port, to allow for direct connection to a variety of devices.

MODULE FEATURES

24 independently programmable Input / Output Pins Grouped into 3 ports.
Single module High-Speed Digital Input / Output solution.
Integrated Type-B USB Connector.
On-board unique serial number and custom programmable FLASH microcontroller.
Both USB Enumeration information and Microcontroller can be re-programmed to suit customer needs.
Module powered by the USB from the PC or by an external power supply.
Virtual COM Port driver allows access as a regular serial port.
Optional DLL based driver available.
Easy to program using popular development languages C, C++, C#, VB, etc.
Simple command set for easy control of ports and data transfer.

Absolute Maximum Ratings

Maximum Voltage on Any Pin (referenced to GND) 5.1 V DC
Minimum Voltage on Any Pin (referenced to GND) -0.1V DC
Supply current when USB enumerating 55mA
current when running with no load on I/O pins 32mA
Total Current to or from Any
Single I/O Pin 30mA
PORT (8 Single I/O make a PORT) 50mA
Total Current in or out of all the module’s I/O pins 200mA

Development Resources: demo codes, schematics, datasheets, etc

Control IC: FT245RL

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.